A105 Carbon Steel Bar

A105 Carbon Steel Bar

A105 is an ASTM specification for steel forgings, primarily for carbon steel forged pipe components. The type of carbon steel wrought alloy involved is a low carbon, manganese and silicon steel similar to the AISI 1330, but with a lower manganese content.

View Details
Free Quote
AISI/SAE 1045 C45 Carbon Steel Bar

AISI/SAE 1045 C45 Carbon Steel Bar

1045 is characterized by medium carbon, medium tensile strength steel, which has quite good strength, machinability and reasonable weldability under hot-rolled conditions. 1045 round steel can be provided with hot rolling, cold drawing, rough turning or turning and polishing. By cold-drawing the 1045 steel bar, the mechanical properties can be improved, the dimensional tolerance can be improved, and the surface quality can be improved.

View Details
Free Quote
A36 Carbon Steel Bar

A36 Carbon Steel Bar

A36 is a low-carbon steel containing trace amounts of manganese, phosphorus, sulfur, silicon and other elements such as copper. A36 has good weldability and high yield strength, and is the most specified structural steel plate by engineers. ASTM A36 is most commonly manufactured as a variety of structural steel parts. This grade is used for welded, bolted or riveted construction of bridges and buildings, as well as for general structural purposes. Due to its lowest yield point, A36 can be used to design lighter-weight structures and equipment, and provide good weldability.

View Details
Free Quote
A572/S355JR Carbon Steel Bar

A572/S355JR Carbon Steel Bar

A572 steel bars are lightweight, but have good strength, ductility and workability, making them ideal for structural applications. These characteristics make the A572 relatively simple to shape into different structures, while maintaining the ability to withstand large stresses and loads.

View Details
Free Quote
AISI/SAE 1018 Carbon Steel Bar

AISI/SAE 1018 Carbon Steel Bar

AISI 1018 carbon steel round bars are made of carbon steel, and its composition includes carbon, chromium, manganese, molybdenum, phosphorus, sulfur and silicon. Carbon steel SAE1018 rods are commonly used for shafts, pins, rods, spindles, sprocket assemblies and a wide range of parts. The 1018 bar can be finely processed without any difficulty, and its chips are hard and continuous, so it can be processed into all shapes.

View Details
Free Quote
AISI/SAE 1025 Carbon Steel Bar

AISI/SAE 1025 Carbon Steel Bar

1025 carbon steel is a steel that contains only carbon as its main alloying element. These steels also contain 0.4 percent silicon and 1.2 percent manganese. Small amounts of copper, nickel, molybdenum, aluminum and chromium can also be detected in carbon steel.

View Details
Free Quote
AISI/SAE 4130 Carbon Steel Bar

AISI/SAE 4130 Carbon Steel Bar

4130 cold-rolled round bars provide some recognized weldability without affecting the wear and impact resistance of the steel, carbon steel 4130 bars also have excellent machining properties and can be heat treated. At the same time, it has high tensile strength and high yield strength.

View Details
Free Quote
AISI/SAE 4140 Carbon Steel Bar

AISI/SAE 4140 Carbon Steel Bar

4140 is a 1% chromium-molybdenum medium hardenability general-purpose high-strength steel, usually hardened and tempered in the tensile range of 850-1000 Mpa (condition T). 4140 now have improved machinability, which greatly increases feed and/or speed, while extending tool life without affecting mechanical properties. The prehardening and tempering 4140 can be further case hardened by flame or induction hardening and nitriding.

View Details
Free Quote
AISI/SAE 4340 Carbon Steel Bar

AISI/SAE 4340 Carbon Steel Bar

AISI 4340 alloy steel is a heat treatable low alloy steel containing chromium, nickel and molybdenum. It has high toughness and high strength under heat treatment conditions.

View Details
Free Quote
< 12345 >

CONTACT US

Email:sales@sdsgsteelgroup.com

WhatsApp: +86-16678111188

Tel: +86-16678111188

Room 1-5, 1st Floor, Commercial Building 1, Central Lido, Dongchang East Road, Liuyuan Street, Dongchangfu District, Liaocheng City, Shandong Province

SHANGANG (SHANDONG) STEEL

WhatsApp

SHANGANG (SHANDONG) STEEL

WeChat

MESSAGE

Submit Message

Copyright © SHANGANG (SHANDONG) STEEL CO., LTD.  Powerby :   CEGLOBAL    SEO    Privacy Statement

Business license